Moor House

Moor House
Dallas, TX 75225
James Andrews Custom Homes
Matt Mitchell
5547 Ridgedale Ave.
Dallas, TX 75206
Phone: 214-282-3723
Email Address: mmjach@gmail.com
Website: www.Jamesandrewscustomhomes.com

Project information:
Moor House
Dallas, TX 75225
Date Completed: May 2016
Total cost of project: $1,200,000
Dimensions of building: 55 x 45
Total sq. ft. of conditioned space: 5124
Built By:
James Andrews Custom Homes
5547 Ridgedale Ave.
Dallas, TX 75206
Phone: 214-282-3723
Panels Manufactured By: R - Control

Designed By:
Creative Architects
Scott Roberts
1026 Creekwood Dr.
Garland, TX 75044
Phone: 972-530-4872
Single Family Residential, the client greatly valued and wanted Strength and energy efficiency.
SIP wall thickness and core material: 6.5" eps
SIP roof thickness and core material: 10.25 eps
We have a massive labor shortage here in Dallas so it really help with the speed of framing. Everything was really simple. Because we use SIPs we did not have to over-think anything. That is one of the reasons I like them. sips are a creative solution in and of themselves. They make the whole process easier. Texas Green Build certified
HERS Index: 47
Blower door test results: 1.3 ACH50
HVAC system used on the project: Single 4 ton forced air unit with 4 zones. Gas furnace; steel ducts. two speed condenser.
Windows are .25 u-value the frames are fiberglass. Two 50 gallon tanked water heater that are recirculating. Energy star appliances. South facing windows are behind overhangs for a porch and balcony. Low VOC paint. Artificial grass in the backyard. Grass in the front yard is "Palisades" drought tolerant grass.
Synthetic wood on the balcony deck. Drought tolerant landscaping. Stone coated metal shingles. I used polyurethane crown and floor molding.
Click on a photo to enlarge.
Builder Information
James Andrews Custom Homes
Matt Mitchell5547 Ridgedale Ave.
Dallas, TX 75206
Panels manufactured by R-Control SIPs.