
Premier SIPS
Builder, Design Professional, Manufacturer Regional Sales, Manufacturing
Green Builder Media’s #1 Structural Brand, Premier SIPS is one of the oldest and most awarded SIPs manufacturers in the industry. Premier’s SIP Systems exceed 2021 code requirements, deliver sustainable, warranted and clean air certified structures - that will stand the test of time.
Featured Projects
Tustin, CA
Reduced construction time and labor costs. SIPS were highly energy-efficient and became an integral part of the wall and roof system.read more

Phoenix, AZ
Multi-Family, 59 Affordable Family Housing Units. Grandfamililes refers to a family where grandparents, great-grandparents are raising a child because the biological parents aren't in the picture. This complex provides these non-traditional families affordable housing and a community to connect with.... read more

Basalt, CO
SIP panels saved on labor and construction costs. It also i Using SIP panels increased the R-value of our building envelope increasing our R value from R-21 to R-24. Our blower door test results also improved. We found... read more
Coleharbor, ND
6" SIP walls & 12" SIP roof LEED Gold Certification Standards Model for efficiency for Government Buildings Solar energy, wind generation & geothermal systemread more

Belgrade, MT
The ability to emphasize the quality of the envelope and the speed of construction provided a sense of confidence in the early meetings with the clients. The architect was very satisfied with the support received from the suppliers and SIP... read more

Vancouver, BC
Family Residential Project with Passive House Canada Certification designed for solar gain through windows. The project has a hot water heat pum and it is Solar Ready.read more

Las Vegas, NV
Las Vegas firm SSA Architecture was able to cut energy use by 50 percent and save more than $1 million dollars from the construction budget by specifying SIPs for this 68,000 sq. ft. elementary school.read more
Bellingham, WA
SIPs and an ICF basement make this high performance home close to Passive House standards.read more

Tetonia, ID
The structure serves as a versatile and practical solution for clients looking to bridge the gap between their second home and their dream home.read more

Los Gatos, CA
This project was extremely difficult due to the multiple angels of the walls. Hardly any of the walls had a 90-degree angel. The home would have been quite costly to build conventionally because of these angles; however, SIPs saved considerable... read more

Port Townsend, WA
Set on 5 wooded acres in the foothills of the Olympic Mountains of Washington State, this hilltop modern craftsman-style cottage is designed and set to maximize natural light and cubic footage to create a sense of spaciousness in a tiny... read more

Bremerton, WA
With SIPs, we reduced pollutants and achieved the better indoor air quality and indoor comfort associated with having SIP for walls and the roof. Allows a faster installation time, saving costs associated with labor and framing timelines. We were able... read more

Bend, OR
SIP construction will save labor costs as well as help me achieve Net Zero certifications, which is my goal.read more

Seattle, WA
Owner decided to go with one of TC Legend Homes designs for an open-floor plan, three-bedroom, two-story home, 1,915 square feet in size. It was constructed of structural insulated panels (SIPs), which are manufactured by Premier SIPs out of EPS... read more

San Francisco, CA
Building with SIPs significantly increased the speed of construction to two weeks versus months. Contrary to conventional building methods, using prefabricated SIPs reduced noise and decreased the duration of construction. made it easier to apply exterior finish materials before... read more

Seattle, WA
Project Data: • Name: 19th Avenue • Location: Seattle, WA • Layout: 4 bdrm, 2.5 bath, 2 fl, 2,463 ft2 • Climate Zone: IECC 4C, marine • Completion: May 2016 • Category: custom for buyer Modeled Performance Data: • HERS Index: without PV 44, with PV -2 • Projected... read more

Spanish Fork, UT
SIPs helped comply to owner's dream on having a energy efficient home.read more
Louisville, CO
SIPs construction made the framing process extremely efficient, which allowed for building dry-in ahead of projected construction schedule. Also enabled for energy efficiency goals for this project. SIPS specific engineering provided by Compass Consulting Engineers throughout the design phase (along... read more

Las Vegas, NV
SIP helped this project achieve Energy Efficiency, Labor Time Savings (installed in 80 days!) and waste savings (over conventional framing).read more

Olympia, WA
Residence and demonstration home 10-inch SIP walls 12-inch SIP roof Energy Star 3.0 EPA Indoor airPLUS Washington State Built Green Level 5 @200/year in heating costsread more

Boulder Creek, CA
This project was in the middle of a major wildfire and the original house was destroyed. By working with both the insurance company and FEMA they wanted a design that will meet the wildfire regulations in California. SIPs... read more

Everson, WA
TC Legend builds affordable Net Zero energy houses. "We use our small crew to assemble the wall panels, man-handling them into place, but a crane can be used for walls. We do use the crane to set the thicker, heavier... read more

Olympia, WA
HERS index 39 10" SIP walls & floors, '1" SIP roof 5 Star Built Green - Olympia Master Builders Energy Star Northwest Certified Home Builders Challenge Certification The entire shell is SIPsread more

Oak Island, NC
SIPs helped us save time and labor on installation. The real savings is the energy efficiency of the home. This project achieved Energy Star 5+.read more

Freeland, WA
The Owners dream of a cozy, but modern home in the woods.read more

Mill Valley, CA
This house took over 2 years to get building permits because of the high visibility location in Mill Valley. Because the home was built with sustainable, energy efficient products allowed the client to finally obtain a building permit.read more

North Bend, WA
TC Legend handled all aspects of the project from design through construction and has developed consistent high performance home systems that rely on the energy efficient components that SIP offer. Install time is days, not weeks which equates to a... read more

Redmond, WA
The energy efficiency is critical as the home needed to generate enough energy to not only operate, but to power/operate future electric cars! Install time is days, not weeks which equates to a reduction in framing and other trade labor.read more

Seattle, WA
Install time (FAST), labor costs (minimal compared to other advanced framing options) and ENERGY efficiency. The goal for this project was to generate renewable energy, which is multiplied when the envelope is extremely efficient and much of the energy generated... read more

Issaquah, WA
This model home for a sustainable community shows how SIPs and other energy saving technologies can lower utility bills for homeowners.read more

Kerrville, TX
Energy efficiency for long term operating costs in climate that gets both hot and cold weather. We were told about the exceptional speed of construction - which proved to be true!read more

Sonora, CA
Multifamily duplex/single family home development. Speed of construction & high performance requirements, zero-energy mandate, wildlands-urban interface code. SIPS provide superior insulation and air-sealing, while eliminating the need to vent the attic, which is a big deal when it comes to... read more
Government Camp, OR
Multifamily "condo chalet" in highly desirable Mount Hood, Oregon. Popular for skiing in winter and hiking in summer. As the first condo complex in Oregon, the landmark structure burned down in 2015, and was completely rebuilt and finished in 2018.... read more
Ashland, OR
The Home is sited on an East West axis to allow passive solar gain as well at aligning the roof for both Solar thermal and a PV system. The client installed ALL LED light except the oven. And that only... read more

Burien, WA
Spec Home with Ultra-Green features in Washington State: Premium 5-Star Built Green, Positive Energy beyond Net-Zero energy home in the heart of Columbia City, Seattle.read more

Ennis, MT
10" and 12" SIP walls and 12" SIP roof HERS Index 22 Curved SIPs 0.17 ACH50 Off the grid: 4kW solar system and three 1kW wind turbines ICF basement Radiant heating with wood-fired boilerread more

Moscow, ID
SIP saved much time, labor and costs on this project.read more

Virgin, UT
The client wanted a very energy-efficient home. Having used SIPs several times, I knew they were the perfect choice. With labor, construction costs, and time, all combined with solar power this home is very energy-efficient.read more

Petersburg, AK
SIPS were our choice. We wanted these for our structure not only for personal investment but for the overall energy savings down the line. SIPs allowed us to reach an energy rating that reduces our financial costs in Alaska's Rural... read more

Gig Harbor, WA
Building an all SIPs home was a "must" requirement by the homeowners. 6-inch SIP walls, 10-inch SIP roof Air infiltration tested at 1.36 ACH50 Ductless heat pumps Double-glazed, Low-e, argon-filled windowsread more

Olympia, WA
The buyer selected us because we use SIPs, hydronic radiant heat, and HRV’s as our standard construction system and we would certify their home with Energy Star. Using SIPs created a better building envelope and helped to reduce heat loss... read more

Anacortes, WA
You could not have built this home by any other means at anywhere near the same price. Not only were we able to provide an exceptional design, but we have also provided a zero-energy ready home, as certified by the... read more
Langley, WA
I chose SIP construction for its tightness, speed to dry-in and interior comfort. This being our retirement home, we also were looking for a very energy efficient home.read more
Greenbank, WA
This home is the third SIPs house the owners have built, and this one was built on the lot next to their last SIPS house. This is their forever home.read more

Littleton, CO
Using SIPs on the project contributed to the highly insulated and tightly sealed envelope.read more

Richland, WA
High Performance Construction benefits of using SIPs on this project. SIP construction helped get this construction with speed and high performance requirements.read more

Seattle, WA
Energy savings are significant with an airtight structure and strategic HVAC/Solar systems. nstall time is days, not weeks with standard framing - which equates to a reduction in framing and other trade labor.read more

Shelton, WA
To protect the timbers from the wet weather we needed to dry in the house fast. We also wanted much better insulation envelope compared to a rafter system in the ceiling. We strive for extreme energy efficiency so need a... read more

Tucson, AZ
BASF started with a SIPs-optimized building envelope due to the corporation’s previous experience with projects like the BASF Near-Zero Energy Home.read more

Sonora, CA
Speed of construction & high performance requirements, zero-energy mandate, wildlands-urban interface code. SIPS provide superior insulation and air-sealing, while eliminating the need to vent the attic, which is a big deal when it comes to the Wildlands-Urban Interface Code. Construction... read more

Phoenix, AZ
Energy and time saving convenience; Ease of installation - installed in two days; Eliminated cost of roof insulation; Provided cool/protected environment for subcontractors throughout course of construction.read more

Bend, OR
The Kiowa House is the first of its kind in Bend, Oregon. The healthiest home on the block, the client wanted a high energy, efficiency custom home constructed with SIPS technology.read more

Tacoma, WA
By utilizing SIPS framing the architect was able to impressively integrate both cultural and environmental responsibility into this tribal project to meet the goals set by the Puyallup Tribal Housing Authority "space that reflects culture." Tread more

Ramona, CA
High-performance insulation system for enhanced quiet and comfort Comprehensive draft protection Fresh air system for cleaner indoor air High-efficiency comfort system Energy-efficient appliances and advanced lighting technology for energy and water savings (EDR-92) PHIUS+ US DOE ZERH Housing Innovation Awards - 2017 Winnerread more

Portland, OR
Seeking and achieved LEED Platinum Certification. SIPs were integral part of this due to energy efficiency! Also SIPs are ideal for timberframe construction.read more

Berthoud, CO
With more growth on the front range and increased responsibilities of Northern Water, they have more employees and equipment and need more office and storage buildings to accommodate them.read more

Palo Alto, CA
The project was developed and designed to provide a positive impact on residence health while promoting renewable, clean energy. The airtightness of continuous framing achieved with structural insulated panels is a significant benefit to the customer.read more

Mancos, CO
The clients were interested in energy efficiency and durability. After comparing stick built vs SIP it we found SIP to be the more economical & efficiency method and our clients agreed.read more
Los Banos, CA
10" SIP roof LEED Silver SIP roofs applied over steel moment framesread more

Bellingham, WA
Beyond just Green Building, a positive-energy home not only produces 100% of the energy it needs for heat, lighting, and appliances but generates enough extra solar power to run an electric car thousands of miles a year! Amazing. NET-POSITIVE 10.56 kW Solar... read more

Bellingham, WA
Install time is days, not weeks which equates to a reduction in framing and other trade labor.read more

Ogden, UT
SIP save labor and time. We were able to set the walls in 6 hours and be ready for trusses the next day. The energy savings from nearly eliminating all thermal bridges and superior air sealing saved us a ton... read more

Davis, CA
The center was designed for sustainability, energy efficiency, and environmental design. The client aimed for Zero-Energy and sustainable design elements to gain LEED V$ for BD=C Platinum certification. In order to meet these goals, using SIPS was the only building... read more

Coupeville, WA
Certified to DOE's Zero Energy Ready Home Program, meeting all requirements of ENERGY STAR Certified Homes Version 3.0 and the U.S. Environmental Protection Agency's Indoor airPLUS as well as the hot water distribution requirements of the EPA's WaterSense program and... read more
Park City, UT
NET-Zero energy 12" SIP walls, 12" SIP roof & additional 4" EPS insulation on walls and roof, 8" of EPS on foundation Awarded 2010 Green Builder Magazine Home of the year LEED Platinum Built to Passive Haus Institute standards, NAHB Emerald certified, & is... read more
Yarrow Point, WA
Net-zero energy status 10" SIP walls & 10" SIP roof LEED Platinum Energy Star & Built Green Certified Photovoltaic System Panels had custom skins & splines Achieves net-zero energy status! 10K kWh annual usage with 8.6 KW PV array. 80K gallon rain water collection & Air... read more

Bellingham, WA
This is the home of the future. Almost every detail is different. From the way the energy shell is constructed, to the comfort systems that keep your air healthy, and your home at a comfortable temperature.read more

Longmont, CO
The owners of Sundance Farms lived for 30+ years in a converted airplane hangar while running the 15 acre farm.read more

Placitas, NM
Discover a stunning Emerald Green-built home in Placitas, New Mexico, where sustainability meets exceptional design. This energy-efficient residence by Spiegel Kinsley Construction offers a seamless floor plan, perfect for entertaining or relaxing. Highlights include a chef’s kitchen with energy-efficient appliances,... read more

Placitas, NM
This home harmonizes sustainable building with exquisite design capturing Mountain, Mesa, and City Light views. As you step inside the thoughtfully designed floor plan seamlessly connects the living, dining, and kitchen areas, creating an ideal environment for hosting gatherings or... read more

Chelan, WA
This was a rebuild from the 2015 Wildfires & the owner Richard Parkhill was terminally ill so expediency was crucial so he could enjoy one more Lake Chelan Summer with his family. SIPs contributedto the speed of constructionand achieved energy... read more

Seattle, WA
Apartment Building designed to use up to 90 percent less heating and cooling energy than standard buildings. The project is believed to be the first passive house apartment building in Washington State and demonstrates how high performance, sustainable living can... read more

Port Townsend, WA
One of the only options for passive standard construction. More economical than OVE advanced framing options.read more

Parker, CO
K-8 Charter school with 900 students focused on performing arts was built with SIPs due speed of construction. Project was designed with SIPs because it has a very short build time and project team needed most efficient building methods. Panels... read more

Bellingham, WA
Exterior Wall: 6" SIP (GPS insulation) 2x6 service cavity + dense packed cellulose Floor: Slab on grade 4" EPS (fully insulated footings) Roof: 12" SIP (GPS insulation) 2x8 service cavity + fiberglass insulation Window Frame: HH windows- wood with aluminum cladding Window Glazing: Cardinal... read more

Bellingham, WA
Exterior Wall 6" SIP (GPS insulation) 2x6 service cavity + dense packed fiberglass Floor Slab on grade, 4" eps ins (fully insulated footings) Roof 12†SIP (GPS insulation) 2x8 service cavity + fiberglass insulation Window Frame HH WIndows- Wood + Aluminum Cladding Window Glazing Triple Cardinal (180-argon-clear-argon-180) Entrance Door HH Entry... read more

Palo Alto, CA
Exterior Wall: 2x6 SIP w/ 1.5" exterior EPS Floor: Basement slab over 2" EPS Roof: 10" SIP Window Frame: America Italiana, Wood Window Glazing: America Italiana, Triple pane Entrance Door: Sfera Group, triple pane, wood Ventilation: Zehnder Heating System: Daikin Altherma coupled with Messana ray magic radiant... read more

Bellingham, WA
Construction Type: Timber Exterior Wall: 6.5" SIP w/ GPS insulation. 1.5" service cavity w/ natural wool insulation Floor: 11.25 SIP w/ GPS Roof: 11.25 SIP w/ GPS. 1.5" service cavity w/ natural wool insulation Window Frame: Fiberglass Ventilation: Zehnder CA 200 Heating System: Electric resistance Air-tightness: 0.0088... read more

Basalt, CO
The renowned energy-efficient Rocky Mountain Institute selected SIPs for its 2016 Innovation Center located high in the mountains of Basalt, Colorado. At almost 15.610 sq. ft., this building is net-zero, LEED Platinum and the largest Passive Certified structure in the... read more
Jasper, AB
Portable Classroom Prototype to provide an environmentally conscience alternative to traditional portable classroom structures. For future use, the prototype is able to transport easily on the roadway in two parts or all over the world. This collaboration was looking for... read more

Bellingham, WA
TCL coordinated all aspects of the project from design through construction and has developed a "positive energy" system that relies on the energy efficient components that SIP offer.read more
Castle Rock, CO
SIPs were chosen for energy efficiency for operational costs and for future academic curriculum. Social responsibility to choose products that are sustainable for the future of the students attending this school.read more
Chelan, WA
Roof & walls framed with SIPS helped achieve energy efficiency to take advantage of existing structure's mechanical systems. SIPs construction made the framing process extremely efficient, and allowed fast construction for a remodel that wanted to double the footprint while... read more

Oak Harbor, WA
With retrofit insulated panels you can get a higher R-value and a quicker application than the alternatives. Also it is economical for both materials and labor. Combined with other improvements, including new windows, attic insulation, HVAC system and other... read more

North Pole, AK
In the coldest parts of winter in Alaska, energy efficiency for reduced operating costs was key with this addition. Energy efficiency for harsh winters and reduced operating costs is key. The build time was also short in the summer so... read more

Blaine, WA
Single Family Residential. Semiahmoo Net Positive is a "forever home" for a family retiring to the Pacific Northwest. Our clients were seeking a net zero home - one that would produce at least as much energy as it would consume.read more

Seattle, WA
The cold, wet winters in the Seattle area dictate that homes must be well-insulated and stand up to the elements. The energy efficiency and tight building envelope that the SIPs panels provide were key in securing this job. Using SIPs... read more

Overgaard, AZ
To House and protect owners aircraft in the simplest, most energy-effiecient, and most robust as possible.read more

Longmont, CO
SIPs were chosen because the long term value. Now tenants pay $30/month to heat or cool the apartment regardless of season. The project was framed in 3 weeks. This greatly reduced the cost of labor for part of the project.... read more

Longmont, CO
The barn is a utilitarian building that houses both a wood shop and tractor shop/metal fabrication space.read more

Chelan, WA
Lake Chelan Building Supply in Washington State burned to the ground in the 2015 during a devastating forest fire. The owners desired rebuilding the showroom with a smarter construction system to defend from future disasters. SIPs were chosen due... read more

Phoenix, AZ
Time saving: All three structures for the project were constructed in 18 days. A small (3-6 people) framing crew with no prior experience with SIPS quickly learned how to assemble the panels. Less Waste: there was minimal waste by using SIPS,... read more
Mountain Center, CA
By utilizing both Premier SIP walls and roof, this project was able to obtain a tight building envelope to reach energy efficient and indoor quality comfort.read more

Zuni, NM
New Mexico’s high-elevation desert climate with its extreme temperature swings throughout the day and across the seasons makes it essential to have a tight building shell to achieve energy efficiency,” says architect Larry Hibbard. “It was an important criteria... read more

Bozeman, MT
"The use of Premier Panels is an easy way to have unlimited expression of creativity through out the design process. Our clients and con-tractors love that the fact much of the build process takes place at the SIPs factory making... read more
Auburn, WA
Energy efficiency for city responsbility, looking ahead to future operating costs. The city was operating out of a portable for two decades, saving and working towards this building which required extensive approvals and appropriation of funds.read more

Seattle, WA
We were able to construct a very energy efficient Detached ADU, perfect for our cold, wet Seattle winters.read more

Mountain Center, CA
SIP construction was a helpful aspect to the project due to the quick turn around for material and erection process. SIP system was also helpful in minimizing construction time, due to the integral insulation value provided within the wall /... read more

Belgrade, MT
Speed of construction for faster occupation/facility use, and reduced operational costs.read more
Tok, AK
SIP saved time, energy, and created a very valuable tool for the assembly of the building.read more

Santa Rosa, CA
The owner wanted a sustainable energy efficient house and SIPs exceeded making this happen. The architect was also on board with the SIPS and helping to bring SIP construction into the build.read more

Breckenridge, CO
Using SIPs for this project for the thermal efficiency and speed of construction. SIP construction rolled the framing, insulation and sheathing into a one-step installation phase, so the owner was pleased with how the system went up and was very... read more

Asheville, NC
Energy Efficiency and air sealing: Builder provides higher than building code levels of insulation and industry leading levels of air sealing. Client wanted a modern style home with low energy bills and high comfort. (first time builder used SIPS)read more

Ennis, MT
Features: 8-inch SIP walls 12-inch SIP roof with 4-inch thick retrofit insulated panels installed on top for additional insulation Insulated concrete form (ICF) basementread more

Jackson, WY
Speed of construction on challenging job site & high performance requirements.read more

Leavenworth, WA
Energy efficiency, healthy indoor air quality from large panels and reduced air infiltration (family has sensitivities to different building products, so they hired an indoor air quality expert to help select products. Report for this attached.) Speed of construction f... read more

Nehalem, OR
This is an 1850 s.f. single family residence with a Master suite, a guest suite and an Architect’s office.read more

Ogallala, NE
SIPs is extremely energy saving and make the building very comfortable.read more

Swall Meadows, CA
The clients had researched building envelope systems and liked the SIPs. They asked their land surveyor if any local contractors built with SIPS.read more
White Salmon, WA
This 3,600 square foot home encompasses one-floor living with a tower room for getting away and a garden level for guests. Natural material, intimate volumes, and local craftsmanship make living here easy. When the lot faces south and the view... read more
Bozeman, MT
Owner was looking for efficiency and speed of construction. Built with 6-inch SIPs SIPs greatly reduced construction time for retail locationread more

Bend, OR
Building green was a huge priority in the design and construction process. SIPs were a natural fit!read more

Kirkland, WA
“When you start looking at SIPs, you can’t look at just SIPs versus a conventional wall,” said Grant. “SIPs allow me to reduce structure, they allow me to avoid installing continuous rigid insulation on the exterior walls, and when you... read more

Eugene, OR
Ease of construction, overall cost effectiveness, great building envelope with substantial contributions to energy costs. The SIPs provide a superior insulated envelope, while windows bring in plenty of daylight – all helping to reduce energy usage.Landscaped swales allowed rainwater to... read more
Las Vegas, NV
3 stories, 41, 150 sq. ft. 6-inch SIP walls SIP construction reduced cooling costs for building owner in hot Las Vegas climate Framing labor and construction waste disposal costs also reduced by building with SIPsread more
Missoula, MT
The University of Montana's LEED Certified Native American Center utilizes SIP walls and a dramatically curved SIP roof for energy savings and whole-building sustainability.read more

Bethel, AK
To facilitate quality construction with this workforce, pre-fabricated building systems were extensively used and SIP played a major role in providing the unskilled laborers a way to construct the structural system.read more

Yakima, WA
LESS WASTE, LABOR & TIME: Because SIPS are fabricated specifically for the job in the manufacturing facility and due to the repetitive/simple structure, there was very little waste (both physical & labor/time) associated with the roof structure of this project.read more

Livingston Island,
The Antarctic Ecosystems Research Division of NOAA Fisheries conducts scientific research on the population dynamics, behavior, diet, and survival of Antarctic seabirds and pinnipeds on Livingston Island in Antarctica. After 20 years in the harsh Antarctic climate, their modest research... read more
Alpine, CA
This project is just outside of San Diego and includes about 350 homes. The reason SIPs were used had more to do with speed of construction and was not so much about energy savings. In fact, they stick framed the... read more
Cody, WY
Customer chose SIPs for the ease of construction and energy efficiency.read more

Green Valley, AZ
SIp was selected due its better indoor air quality for aging population.read more

Sonoma, CA
SIP construction help get this job done due its speed of construction & strength.read more
Belgrade, MT
Design flexibility (vaulted ceilings), energy efficiency for tight envelope that reduced building operational costs.read more

Seattle, WA
“We chose structural insulated panels (SIPs) for their excellent insulation values, airtightness, and ease of construction.”read more

Anacortes, WA
The combination of SIPS walls with attic trusses allowed us the design flexibility to have a clear span over the garage, with living space above.read more

Cle Elum, WA
SIPS were incorporated into the design and were mandated by the owner. Use of SIPS expedited the building process in an environment of short construction windows and challenging weather constraintread more

Seattle, WA
SIP panels allowed us to build the DADU for substantially less than the quotes client received for traditional construction. Additionally, the SIP panels provided a much more energy-efficient structure, benefiting the homeowners for years to come.read more

Bothell, WA
Speed of construction, energy code requirements, saved time in bad weather, and provided energy efficient roof system w/o venting problems.read more

Idyllwild-Pine Cove, CA
The owner wanted to utilize green technologies whenever possible and still stay within a limited budget. The ongoing energy efficiency in both hot and cold times of the year was a key factor in the decision to use SIPs.read more

Woodinville, WA
Features: 10-inch SIP roof panels. Consistent interior temperature from SIP building envelope helped with product regulation and quality control. SIPs help qualify for Washington State energy code requirements without excessive materials or labor. Plywood was laminated to the SIP roof panels to serve as... read more

Los Banos, CA
SIPs were selected as it can be help achieve less than zero energy and LEED Platinum standards.read more

Escalon, CA
The project includes a new 6,000 sf winery with accessory tasting room and offices. There are 11,000 sf of trellis and arbor area and a 1,800 sf agricultural produce/ product store.read more

Walla Walla, WA
10" SIP floor & 10" SIP roof SIPS provide easy climate control for wine and case goods Build to Washington Green Standardsread more

Tacoma, WA
Climate controlled environments to support the large exhibit's habitats were required, which meant an efficient and stable indoor environment was required. The large tank exhibits also required huge spans of the roof to allow the massive tanks the space for... read more

Shelton, WA
The 22,000 sq. ft. center has a gymnasium, meeting hall, commercial kitchen, dining room, fitness center, computer lab and space for culture and art classes for the Skokomish Tribal community.read more

Boise, ID
1. SIPs ensure higher standards of product despite labor shortage of experienced framers. 2. Lower assembly time of the roof system. 3. Ensure high energy standards are met due to the air tightness of the product. 4. Construction costs are... read more

Langley, WA
The unique nature of this project was to create three nearly identical homes on a single 7,200 sq ft lot that share common elements such as, similar floor plan, same windows, doors etc. This project brings the popular trend of... read more

Kerrville, TX
Energy efficiency for long term operating/energy cost reductionread more

Seattle, WA
Using SIPs on this project has provided ongoing energy savings for the Client.read more

Kenmore, WA
The building is the ‘living room’ for the city of Kenmore, WA. A year-round focal point for the city, the structure includes a partitioned, multi-use assembly space for public gatherings, music, lectures, after-school programs and dance classes and more.read more

Oak Harbor, WA
"I did not know I could have all this, until my builder told me about it. My wants were simple; I wanted a home that would be more comfortable than my old one, all on one level, and use less... read more
Mitchell, OR
HERS Index -15 House powers itself and the occupant’s vehicle 6-inch SIP Walls and 12-inch SIP roof Emerald Level National Green Building Standard Certification Ductless mini-split heat pump Solar hot water heater Generates energy through photovoltaic systemread more

Coupeville, WA
• Layout: 1 bdrm, 1 bath, 2 fls, 694 ft2 • Climate: IECC 4C, marine • Completed: July 2020 • Category: Attached Housing • Annual... read more
Coupeville, WA
Energy-efficient Whidbey Island home built with SIPs to allow Zero Energy Ready designation from the U.S. Department of Energyread more

Oak Harbor, WA
Faster build time, tighter building envelope, better indoor air quality, better insulation values, vapor-proof (condensation-free) wall and roof assemblies.read more
Bellingham, WA
Project Data: • Name: Bellingham Power House • Location: Bellingham, WA • Layout: 4 bedrooms, 3 baths, 2 floors • Conditioned Space: 2,781 ft2 • Climate Zone: IECC 4C, marine • Completion: March 2015 • Category: Custom Modeled Performance Data: • HERS Index: without PV 34, with PV -12 •... read more

Lopez Island, WA
Using SIPs to help get to zero energy use and reduced labor. Use of local materials such as trees removed from the site milled for siding. Rainwater catchment for irrigation. All Water Wise fixtures and energy efficient lighting. Passive solar... read more

Anacortes, WA
Single-family home, with mother-in-law suite on the main accessible level. SIP construction is one of the primary keys to our company's success in designing and building Zero-Energy Homes.read more
Clinton, WA
Certified zero-energy-ready by the U.S. Department of Energy. Two story view home.read more

Ellensburg, WA
The Client was going to build this himself and wanted the best energy efficiency and ease of construction.read more
Greenbank, WA
Zero Energy Ready SIP home as certified by U.S. Department of Energyread more
Seaside, CA
Clarum has used Structural Insulated Panels (SIPs) in many of its homes to create high-performance building envelopes. With SIPs, it is much easier to reduce air leaks than with stick framing, since the panels are produced in a controlled setting... read more
Greenbank, WA
SIP home certified as Zero Energy Ready by the United States Department of Energy.read more
Seattle, WA
Project Data: • Name: Montlake Modern • Location: Seattle, WA • Layout: 4 bedrooms, 3.5 baths, 2 floors • Conditioned Space: 3,192 ft2 • Climate Zone: IECC 4C, Marine • Completion: May 2014 • Category: Custom Modeled Performance Data: • HERS Index: without PV 42, with PV -1 • Projected... read more

Sonora, CA
Speed of construction & high performance requirements, zero-energy mandate, wildlands-urban interface code. SIPS provide superior insulation and air-sealing, while eliminating the need to vent the attic, which is a big deal when it comes to the Wildlands-Urban Interface Code. Construction... read more

Seattle, WA
Using SIPs will help us achieve our goal to "be able to offset 100% or more of its usage with a roof-sized solar electric system"read more

Oak Harbor, WA
This home was designed with SIPS in mind; the heights of walls, pitch of the roof, and spans of roof SIPs were all optimized for passive solar gains, active PV system exposure and to fit within the parameters allowed by... read more